Video diagnostics & tele-inspection
CCTV inspection of pipelines and collectors — precise defect localization with a video report and recommendations.
How the work is carried out
A simplified scheme of the key stages. Scroll to see the sequence.
Typical applications
- Inspection before relining, renovation or property purchase
- Locating blockages, sags, cracks and leaks
- Acceptance of new networks and work quality control
- Scheduled inspections for utilities and industry
Things to consider
- Heavily clogged sections require hydrodynamic cleaning first
- Inspection diameter range — d110–d1500 mm
Technical capabilities
Work stages
- 01
Survey
Site visit, initial data collection; tracing and video diagnostics if needed.
- 02
Estimate & quote
Engineering calculation, technology and material selection, commercial proposal.
- 03
Preparation
Method statement, equipment mobilization, pit and site setup.
- 04
Execution
Work under the approved design with quality control at every stage.
- 05
Testing & handover
Pressure testing, video check, as-built documentation, acceptance act.
What the customer gets
- Inspection video record
- Inspection act with defect list
- Repair/relining recommendations
FAQ
What do I get as a result?
A video record, an inspection act with defects referenced by chainage, and recommendations for further work.
Does the pipe need preparation before inspection?
Preferably. If the section is clogged, hydrodynamic cleaning is done first — otherwise the camera won’t pass or the survey will be incomplete.
What diameters can be inspected?
From d110 to d1500 mm — from building outlets to trunk collectors.